We – EPG Group the largest agricultural gearbox and pto factory in China with 5 different branches. For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

The star tube is appropriate for programs with high torque peaks that could be damaging to the other tube shapes. The star tube with 6 contact details is also the favored decision when transmissions exceed 1600mm in size and when the velocity is 1000 rpm. AG sequence with splined tube The splined tube is suggested for extremely brief PTO shafts. The splined telescopic shaft allows bushing and splined couplings of only one hundred-120mm. The proportions of the cross joints fluctuate from 22mm diameter up to 48mm diameter and allow electricity transmission of up to 250HP. Routine maintenance Maintenance on these models is straight ahead and like all relocating areas these need their fair share of grease and should be greased often as these elements function very hard and are topic to all that mother nature can offer for use and tear. Very good grease is essential here place grease in right up until you see the old grease oozing out. Go simple on the “U” joints so you really do not blow the seals. Quick bursts of a low pressured air grease gun or even much better a hand pump gun will do the occupation and should be done primarily based on hourly use. At least as soon as a period the major and secondary shafts must be separated. All debris and any rust must be cleaned off. Examine completely for any indicators of stress and apply a liberal amount of grease. In addition to this, the two the PTO yoke holes need grease inside of of them at the very least once a 12 months alongside with the yoke lock pin. pto shaft extension tractor offer EPG substitute pto shaft for submit gap digger specializing pto hydraulic piston pump in massey one hundred thirty five pto shaft removing the pto replacement components manufacture 2006 toyota tacoma generate shaft of weasler pto shaft catalog rotocultivator reconditioned drive shafts ploughshares a thousand to 540 pto adapter and 2001 chevy silverado travel shaft other non-standardized farm machinery reducing equipment. Our items is popular exported to the United States, Germany, Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Middle and South The united states, Thailand, Pakistan, Indonesia, much more than sixty nations around the world and areas.

No Cellular: +86-13083988828escopic Flange Cardan Shaft Coupling (SWC WF)

SWC-WF type cardan shaft coupling is a kind of the most commonly employed with the traits of its construction can not in the same axis or axis angle or more substantial axial movement of two large equiangular constant rotary pace, and reliably transfer torque and motion. It can be widely utilised in metallurgy, lifting, transportation, mining, petroleum, shipbuilding, coal, rubber, paper machinery and other heavy equipment industry machinery shaft in the transmission torque.

♦Product Composition

♦Basic Parameter And Main Dimension

Model	D	Tn/ kN·m	Tf/ kN·m	β/ (°)≤	Lmin	D1 (js11)	D2 (H7)	D3	Lm	n-d	k	t	b (h9)	g	I/kg·m2		m/kg
															Lmin	one hundred	Lmin	one hundred
SWC180WF	180	12.5	6.three	25	560	one hundred fifty five	a hundred and five	114	110	8-seventeen	17	five	–	–	.248	.007	58	two.8
SWC225WF	225	forty	twenty	15	610	196	one hundred thirty five	152	one hundred twenty	8-17	20	five	32	nine	.636	.0234	93	4.nine
SWC250WF	250	63	31.5	15	715	218	150	168	one hundred forty	8-19	twenty five	6	forty	12.5	1.352	.0277	143	five.3
SWC285WF	285	90	forty five	15	810	245	170	194	a hundred and sixty	eight-21	27	seven	forty	fifteen	two.664	.051	220	six.three
SWC315WF	315	one hundred twenty five	63	15	915	280	185	219	a hundred and eighty	10-23	32	eight	40	fifteen	four.469	.0795	300	eight
SWC350WF	350	180	ninety	15	980	310	210	267	194	ten-23	35	eight	50	16	seven.388	.2219	412	15
SWC390WF	390	250	125	fifteen	1100	345	235	267	215	ten-twenty five	40	eight	70	eighteen	13.184	.2219	588	15
SWC440WF	440	355	a hundred and eighty	fifteen	1290	390	255	325	260	sixteen-28	forty two	10	eighty	twenty	23.twenty five	.4744	880	21.seven
SWC490WF	490	500	250	15	1360	435	275	325	270	sixteen-31	47	twelve	90	22.5	forty.75	.4744	1173	21.seven
SWC550WF	550	710	355	fifteen	1510	492	320	426	305	16-31	50	twelve	one hundred	22.five	68.48	one.357	1663	34
SWC620WF	620	one thousand	500	15	1690	555	380	426	340	ten-38	55	twelve	100	twenty five	127.53	one.357	2332	34

♦Product Show

♦Huading Cardan Universal Shaft Attributes
1. We provide over 1000 diverse spare parts for a wide selection of agricultural machinery, from merge harvesters, mowers,rakes to balers.They are used for a variety of helps make like John Deere, LAVERDA ,Claas, New Holland and Scenario/IH. 

two.Elastomer connecting in the center

three.Can take up vibration, compensates for radial, axial and angular deviation

4.Oil resistance and electrical insulation

5.Have the same attribute of clockwise and anticlockwise rotation

♦Cardan Shaft Types
We can provide you SWP,SWC,WSD,WS universal coupling as pursuing:
Welded shaft kind with size payment / expansion joint

Brief variety with size compensation / enlargement joint

Brief variety with out size payment / enlargement joint

Prolonged sort with out duration compensation / growth joint

Double flange with length compensation / enlargement joint

Extended sort with huge size compensation / large expansion joint

Tremendous Brief type with length payment / expansion joint

♦Other Merchandise Checklist

Transmission Machinery  Parts Identify	Design
Universal Coupling	WS,WSD,WSP
Cardan Shaft	SWC,SWP,SWZ
Tooth Coupling	CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK
Disc Coupling	JMI,JMIJ,JMII,JMIIJ
Substantial Adaptable Coupling	LM
Chain Coupling	GL
Jaw Coupling	LT
Grid Coupling	JS

♦Our Company
Our business supplies distinct kinds of goods. Higher top quality and realistic price. We stick to the theory of “good quality initial, support very first, constant advancement and innovation to satisfy the consumers” for the management and “zero defect, zero grievances” as the top quality aim. To excellent our services, we give the goods with excellent top quality at the realistic value.

Welcome to customise items from our factory and make sure you provide your 
design and style drawings or make contact with us if you need other requirements.

♦Our Companies
1.Design and style Solutions
Our style crew has experience in cardan shaft relating to product style and development. If you have any demands for your new solution or would like to make further enhancements, we are here to offer you our assist.

two.Solution Solutions
raw components → Slicing → Forging →Rough machining →Shot blasting →Heat remedy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

three.Samples Method
We could produce the sample in accordance to your necessity and amend the sample constantly to meet your need to have.

four.Research & Growth
We typically research the new wants of the market place and create the new model when there is new automobiles in the market.

5.Quality Manage
Each step should be particular check by Expert Employees according to the regular of ISO9001 and TS16949.

♦FAQ
Q 1: Are you buying and selling firm or company?
A: We are a expert manufacturer specializing in producing
a variety of sequence of couplings.

Q 2:Can you do OEM?
Sure, we can. We can do OEM & ODM for all the consumers with custom-made artworks of PDF or AI format.

Q 3:How prolonged is your shipping and delivery time?
Usually it is twenty-thirty times if the products are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Of course, we could offer you the sample but not for totally free.Truly we have a really good price theory, when you make the bulk purchase then cost of sample will be deducted.

Q 5: How extended is your warranty?
A: Our Warranty is 12 month underneath regular circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection processes for coupling ?
A:a hundred% self-inspection just before packing.

Q 8: Can I have a pay a visit to to your factory before the order?
A: Sure,welcome to visit our manufacturing facility.

Q nine: What is actually your payment?
A:1) T/T. two) L/C 

 

The use of original tools manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our company and the listed replacement areas contained herein are not sponsored, accepted, or produced by the OEM.