The Vertical Rhythm of the Paddy
In the mechanized rice fields of Rio Grande do Sul (Brazil), establishing the correct plant population is critical for yield. While the Lateral Feed Case moves the tray left and right, the Longitudinal Feed Gearbox (Caixa de Alimentação Vertical) dictates how much of the seedling mat is pushed down into the picking fingers at the end of each stroke. This determines the “clump size” or seedling density per hill.
This specific gearbox acts as a precision dosing unit. It converts the reciprocating motion of the lateral slide into a stepped, one-way rotation that drives the rubber feed belts. The mechanism must be incredibly consistent, delivering exactly 8mm to 18mm of mat travel per cycle, regardless of whether the mat is dry and light or waterlogged and heavy (up to 30kg).
EVER-POWER’s LF-Series (Longitudinal Feed) gearboxes feature a reinforced Ratchet & Pawl System housed in a sealed aluminum enclosure. Designed for the acidic, wet environment of the Várzea, these units prevent “belt slip” and ensure uniform crop stands, a key factor for the high-yield varieties used in South America.
Technical Specifications: LF-Series (Vertical Feed)
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Mechanism Type | Adjustable Ratchet / Cam | Feed Amount Range | 8mm – 18mm (Stepped) |
| Input Motion | Reciprocating Lever | Output Motion | Intermittent Rotary |
| Housing Material | Die-Cast Aluminum ADC12 | Output Torque | Max 35 Nm |
| Ratchet Material | Sintered Steel (Hardened) | Pawl Material | 20CrMnTi (Carbonitrided) |
| Input Shaft | 12mm / 14mm Stainless | Output Shaft | Hex 14mm / 17mm |
| Adjustment Steps | 10 Levels (Lever Control) | Feed Belt Interface | Double Sprocket |
| Sealing Rating | IP67 (Splash Proof) | Lubrication | Synthetic Grease (Sealed) |
| Seal Type | TC Double Lip NBR | Corrosion Coating | Anodized Black / Silver |
| Bearing Type | Needle Roller / POM Bush | Operating Temp | -10°C to +55°C |
| Weight (Unit) | 1.2 kg – 2.5 kg | Accuracy | +/- 0.5mm per stroke |
| Mounting | Side Flange 3-Bolt | Load Capacity | Moves 35kg Wet Mat |
| Compatibility | Kubota NSP / Yanmar VP | Warranty | 12 Months |
Engineering the “Precision Push”
1. The Ratchet Mechanism Logic
To control seedling density, the feed belt must move in discrete steps. We utilize a precision One-Way Ratchet Clutch. When the lateral feed case reaches the end of its stroke (hitting the side bumper), it actuates a lever on the Longitudinal Gearbox. This lever drives a pawl that rotates the internal gear by a specific number of degrees. Our ratchets are wire-cut (EDM) from tool steel to ensure sharp engagement edges that don’t slip even when coated in grease.
2. Adjustable Feed Ratios
Different rice varieties (Long grain vs. Short grain) require different mat consumption rates. Our gearbox features an external Selector Lever with positive detents. This lever changes the effective stroke length of the ratchet pawl, allowing the operator to select between “Fine” (8mm), “Medium” (12mm), and “Coarse” (16mm) feed rates instantly, without tools, optimizing the machine for local conditions in Santa Catarina.
3. Waterproof Breather System
Internal pressure changes due to temperature cycling can suck moisture into the gearbox. Standard vents clog with mud. We integrate a Gore-Tex™ Membrane Vent. This allows air to expand and contract but blocks liquid water and mud particles down to 3 microns. This keeps the internal mechanism dry and rust-free, extending service life by 50% compared to open-vent designs.
4. Over-Torque Protection
If the seedling mat is frozen or the belt is jammed with debris, forcing the feed lever can break the internal gears. We include a Shear Pin or a Spring-Loaded Override on the input lever. This mechanical fuse disconnects the drive if resistance exceeds 25Nm, protecting the expensive internal components from operator error or field hazards.
System Comparison: Ratchet Feed vs. Continuous Roller
| Feature | Longitudinal Ratchet Box (LF-Series) | Continuous Roller Feed |
|---|---|---|
| Feed Precision | Step-Exact (No Drift) | Variable (Slippage Prone) |
| Load Handling | High (Positive Engagement) | Low (Friction Dependent) |
| Seedling Damage | Low (Moves only at turn) | Medium (Constant pressure) |
| Adjustability | Instant Lever Click | Change Gears/Pulleys |
| Complexity | Medium (Internal Gears) | Low |
*Comparison based on planting uniformity tests in Uruguaiana, RS.
Localized Application: Brazil Rice Belt
Heavy Clay Mats (Camaquã)
In the Camaquã region, farmers use clay-heavy seedling mats that are 20% heavier than average. Standard feed boxes often skip teeth under this weight. Our LF-Series uses Oversized Pawls with a deeper engagement angle to grip the ratchet wheel securely, ensuring reliable feeding even with 35kg mats.
Ergonomic Adjustment (NR-17)
Operators often need to adjust feed rates mid-field. Small, stiff levers cause hand fatigue. In compliance with NR-17 ergonomics, our adjustment levers are Rubber-Coated and Enlarged, allowing easy operation even with muddy gloves, reducing downtime during calibration.
📒 Field Engineer’s Log: The “Skipping” Belt
“September 2025, Alegrete. A rice estate manager reported uneven planting density. Some rows were thick, others thin. We inspected the Longitudinal Feed Boxes. The internal ratchet pawl springs had rusted and lost tension, causing the pawl to skip over teeth randomly.”
“The boxes were not sealed against the high humidity of the storage shed.
Solution: We replaced the springs with Stainless Steel 316 Springs and upgraded the housing gasket to a formed-in-place silicone bead. We also educated the team on checking the ‘click’ sound during pre-season maintenance. The planting uniformity returned to 98% accuracy.”
Frequently Asked Questions (OEM/B2B)
1. Is the feed box compatible with Yanmar VP series?
Yes, our LF-Series uses the standard mounting bolt pattern and input lever geometry found on Yanmar VP and Kubota NSP transplanters. It is a bolt-on upgrade for aging OEM units.
2. Can I replace just the internal ratchet pawl?
Yes, we supply a “Rebuild Kit” containing the ratchet wheel, pawl, spring, and cover gasket. However, given the low cost of the complete unit, most commercial farms prefer to swap the entire gearbox to save labor time.
3. Does it come pre-greased?
Yes, all our LF-Series gearboxes are factory-filled with high-performance synthetic grease rated for the life of the unit (approx. 800-1000 hours). No initial lubrication is required.
4. What happens if the feed belt jams?
The input lever has a calibrated “Break-Away” design. If the internal torque exceeds safety limits (due to a frozen mat or stone), the external linkage will disconnect or bend before the internal gears shatter, serving as a mechanical fuse.
Complete Your Feed System
Lateral Feed Cases
The transverse movement gearbox that works in sync with the longitudinal unit.
Reliable Feeding for Uniform Harvests
Eliminate variable density and wasted seedlings with EVER-POWER Longitudinal Feed Gearboxes.
© 2026 EVER-POWER Transmission. All Rights Reserved.
Major Markets: Brazil, Philippines, Vietnam, India, Colombia.
