Four Use Skills of Reducer

Four major use skills of reducer:
80. During work, when the oil temperature rises above 100°C or the oil pool temperature exceeds XNUMX°C and abnormal noise is found, stop using it. Check the cause, troubleshoot the fault, and replace the lubricating oil before continuing to run. .
XNUMX. When changing the oil, wait for the reducer to cool down and there is no danger of burning, but it should still be kept warm, because after the complete cooling, the viscosity of the oil will increase and it will be difficult to drain the oil. Note: cut off the power supply of the transmission device to prevent accidental power-on .
200. After 300~5000 hours of operation, the oil should be changed for the first time. In the future use, the quality of the oil should be checked regularly, and the oil mixed with impurities or deteriorated should be replaced in time. In general, for long-term continuous work For the reducer, replace the new oil according to the operation for XNUMX hours or once a year. The reducer that has been out of service for a long time should also be replaced with new oil before restarting. The reducer should be added with the same oil as the original brand, and must not be mixed with oils of different brands , Oils of the same brand but different viscosity are allowed to be mixed.
Fourth, the user should have reasonable use and maintenance rules and regulations, and the operation of the reducer and the problems found during the inspection should be carefully recorded. The above regulations should be strictly implemented.