We our goods are offering ept in the American, European, South American and Asian markets. a specialised supplier of a full selection of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….- EPG Team the most significant agricultural gearbox and pto factory in China with 5 different branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Plastic HDPE Heat Preservation Anticorrosive Pipe Ma ept Plastic Machine
HDPE Pipe Software:
Agricultural Irrigation water offer&Sweage drainage pipe&Discharge method&Gas supplly technique&Architectural h2o offer.
Production Flow of Pipe Creation Line:
Material →Color Mixer →Automatic Feeder→Hopper Dryer →Single Screw Extruder →Extrusion Mould & Calibrator → Vacuum Calibration Cooling Tank → Spray Cooling Tank →Printer → Haul-off Unit →Cutter →Stacker or Coiler
Characteristics of Pipe Machiner:
one- 30m/min of highest lineal extrusion velocity, large potential and reduced power usage, and achieved multi- layers co extrusion with 1-5 layers.
two- The copper bush is more use-resisting and avert material leakage which can promise a steady managing of extruder.
three- Materials feed by way of spiral groove, productive transmission and can successfully minimize again-stress on extruder.
4- Special design and style (barrier, shearing and mixing zone) assures a uniformed plasticizing influence, and can decrease the stress on the screw which guarantees a large pace and steady output capacity.
5- Higher torque gear box has a smart figuration, compact design, low sounds, large carrying ability, substantial transmission efficiency can guarantee long-time difficulties-free operation
six- PCA(pipe air cooling system) of die head largely boost the extrusion velocity and lower the cooling length of extrusion line, and improve top quality of interior pipe surface
7- Intelligent PLC controlling system with human-pleasant interface make the procedure easily and conveniently
8- Chip-totally free cutter ensuing flat and easy cutting surface of pipe.
Main Technical Parameter:
Machine design |
Pipe diameter | Vacuum Calibration Tank | Spray Cooling Tank | Haul-off unit | cutter | ||||
Vacuum pump | Water pump |
Length(mm) | Water pump |
Duration(mm) | caterpillar Quantity | Motor | Cutting type | ||
HDPE63 | φ16mm-φ63mm | 3kw*2 | 3kw*two | 6000mm | 3kw*one | 6000mm | 2 | one.5kw*2 | No dust cutter |
HDPE-a hundred and ten | Φ40mm-φ110mm | 4kw*two | 3kw*2 | 6000mm | 3kw*1 | 6000mm | 2 | 3kw | No dust cutter |
HDP kia ceed gearbox linkage difficulty E-one hundred sixty | Φ50mm-φ110mm | 4kw*2 | 4kw*two | 6000mm | 4kw*one | 6000mm | three | one.1*three | Planetary cutter |
HDPE-250 | Φ75mm-φ250mm | 5.5kw*2 | five.5kw*two | 6000mm | 4kw*one | 6000mm | three | one.1kw*three | Planetary cutter |
HDPE-315 | Φ110mm-φ315mm | 5.5kw*2 | 5.5kw*two | 6000mm | 5.5kw*one | 6000mm | four | 1.1kw*four | Planetary cutter |
HDPE-630 | Φ315mm-φ630mm | seven.5kw*two | 7.5kw*two | 6000mm | seven.5kw*one | 6000mm | 6 | one.1kw*six | Planetary cutter |
HDPE-800 | Φ400mm-φ800mm | five.5kw*2(2m) | five.5kw*2(2m) | 6000mm | 5.5kw*2 | 6000mm | 8 | 1.1kw*eight | Planetary cutter |
seven.5kw*2(10m) | 7.5kw*2(10m) | ||||||||
HDPE-1200 | Φ630mm-φ1200mm | five.5kw*two | 7.5kw*2 | 6000mm | seven.5kw*two | 6000mm | 10 | 1.1kw*ten | Planetary cutter |
Device image:
Extrusion equipment
Vacuum Calibration Cooling tank & Spray Cooling tank
Haul-off Unit
Planetary Car-Cutter
Plastic Pipe Stacker
If you have any queries, you should contact us:
Mob/Watsap/Wchat:+86-18915692496
The use of original gear manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our firm and the detailed alternative parts contained herein are not sponsored, accepted, or created by the OEM.