If you are interested in any of our products or would like to discuss a potential order, please feel free to contact us.
Overview
Quick Details
- Applicable Industries:
-
Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, farms, Construction works , Energy & Mining, agricultural machiner
- Product name:
-
PU Rubber 5M Timing Belt Pitch 5mm
- Standard or nonstandard:
-
Standard
- Color:
-
Black
- Model no.:
-
MXL, XL, L, H, XXH, T5, 3M, S2M, 5GT…
- Cord:
-
Glass Fibre
- Feature:
-
Durability
- Pitch:
-
5mm
- Teeth number:
-
10-80T
Packaging & Delivery
-
Lead Time
: -
Quantity(Bags) 1 – 100 >100 Est. Time(days) 7 To be negotiated
Online Customization
Product Introduction
Rubber Synchronous Belt
Industrial synchronous belt applies the superior synthetic neoprene imported from Japan as main raw material. It matches with multiple auxiliary materials with various uses. Skeleton uses the superior glass fiber cord imported from Japan. Tooth face of the belt adopts nThe company covering 88,000 square meters, has advanced equipment and strong technical strength, such as the numerical control machine tools and machining centers, CAD/CAM system, industrial robot etc. ylon 66 high spandex for protection.
Synchronous belt drive is a novel drive mode that utilizes pulley gear meshing to transfer motive power. It has accurate synchronous drive function. It needs no lubrication without slip differential nor pollution and with little noise. Drive efficiency reaches to 0.Machining of the gearbox To make a worm gearbox, first take a blank of an alloy. A bronze bearing is made in the center of the blank. The hobbing cutter is then used to reduce the diameter of the blank relative to the finished height of the tooth tip on the gear wheel, so the depth of the cut needs to be added to the blank’s diameter. The necessary threading tool is grind to cut the worm. The side clearance on the left-hand side of the cutter tip is allowed for the worm’s pitch angle. The best finish is put on the cutting tool using a slip stone. Gear blank is then mounted on a turntable that acts as a bearing support. This bearing support is mounted on the rear of the lathe cross-slide with the hobbing cutter mounted between the centers. The two worms are then machined, out of which one is made the cutter and finally the cutter is used to machine the worm gear.98. Speed ratio range can fulfill 1:10. Allowable linear speed can attain 50m/s. Drive efficiency ranges from seClose up of two yokes with the universal joint. Note the slight oozing of grease from the UJ seal ends, the clump of grease is from inside the yoke splined shaft area –Drive (outer) yoke has a female (usual spline) hole and “Y” shape end that is the universal joint (UJ) mount. –UJ is a cross shaped casting having roller bearings enclosed with caps at all four points and is held into the yoke with four “C” clips –Inner yoke and drive shaft is another yoke welded to the drive end, of the drive shaft. –Driven shaft and inner yoke is the driven shaft that rides inside of the drive shaft and has a yoke welded at the driven end –UJ another UJ as aboveveral hundred watts to several kilowatts. It features as fine dynamic flex resistance, good anti-cracking properties, superior ozone-proof peformance, sound heat-resistance and wear-ability etc.
Detailed Images
Type:
Single side timing belt
Double side timing belt
Close timing belt
Open timing belt
Rubber timing belt
PU timing belt
We can supply all kinds of rubber timing belt ! If you need, please don’t hesitate to contact me.
Teeth Type |
Model Number |
Trapezoidal toothed |
MXL,XXL,XL,L,H,XH,XXH |
Arc toothed |
3M,5M,8M,14M,20M |
T-toothed |
T2.5,T5,T10,T20 |
S-toothed |
S2M,S3M,S4.5M,S5M,S8M,S14M |
Parabolic toothed |
P2M,P3M,P5M,P8M,P14M |
G,Y-toothed |
G2M,G3M,G5M,Y8M |
Our timing pulley
C45 Steel timing pulley
Aluminum timing pulley
POM/Nylon/Plastic timing pulley
Timing pulley with anodic oxidation
Application
Payment & Shipping
Contact Us