Turning Waste into Wealth: The Mechanical Challenge
Brazil is a global powerhouse in animal protein production. With the explosion of intensive feedlots (Confinamento) in Goiás and large-scale poultry farming in Santa Catarina, the management of organic waste has become a critical logistical operation. The Manure Spreader (Distribuidor de Esterco / Espalhador de Estrume) is the machine tasked with returning these nutrients to the soil.
This machine relies on two distinct but synchronized drivetrain systems. First, the Beater Gearbox (Rear Discharge) drives the vertical or horizontal beaters that shred the compacted manure. Second, the Boîte de vitesses à entraînement par tablier moves the floor chains to push the heavy load (often 10 to 20 tons) towards the beaters.
The operating environment is hostile. The gearboxes must endure extreme torque spikes when a stone or frozen lump enters the beaters, and they must resist the highly corrosive nature of uric acid and ammonia found in manure. EVER-POWER’s MS-Series (Manure Spreader) gearboxes are built with nodular cast iron housings and chemically resistant seals to survive where standard agricultural boxes fail.
Technical Specifications: RT-Series (Rear Beater Drive)
| Paramètre | Spécification | Paramètre | Spécification |
|---|---|---|---|
| Puissance d'entrée nominale | 60 HP – 180 HP (45-132 kW) | Rapport de transmission | 1:1.35 / 1:1.92 (Speed Up) |
| Vitesse d'entrée | 540 / 1000 tr/min | Vitesse de sortie | 400 – 800 RPM (Beater Speed) |
| Matériau du boîtier | Fonte ductile QT500-7 | Couple maximal | 2 800 Nm |
| Configuration | T-Box (Dual Output) / L-Box | Arbre d'entrée | 1-3/4″ Z20 or 1-3/8″ Z6 |
| Type d'engrenage | Biseau spiralé (Gleason) | Matériel d'équipement | 20CrMnTiH (Trempe superficiellement) |
| Arbres de sortie | Splined 45mm / 50mm | Type de roulement | Rouleau conique lourd |
| Système d'étanchéité | Viton (FKM) Chemical Seal | Respiration | Type de tuba télécommandé |
| Lubrification | Bain d'huile (SAE 85W-140) | Capacité pétrolière | 3.5 Liters – 5.5 Liters |
| Protection contre les surcharges | Shear Bolt or Cam Clutch | Arbre traversant | Optional (For rear gate) |
| Poids (à sec) | 45 kg – 90 kg | Montage | Bride à 4 ou 6 boulons |
| Peinture | Époxy anticorrosion | Garantie | 18 mois |
| Beater Type | Vertical / Horizontal | Facteur de choc | 2.5 (Severe Duty) |
Engineering the “Shredder”
1. Vertical vs. Horizontal Beaters
In Brazil, Batteurs verticaux are preferred for “Cama de Frango” (Poultry Litter) and pen manure because they provide a wider spread pattern (up to 12m). This requires a T-Box that splits power 90 degrees to drive the base of the beaters. Batteurs horizontaux are used for lighter materials. Our RT-Series is modular, adaptable to both configurations via interchangeable output shafts and mounting flanges.
2. Shock Load Management
Manure often contains stones, fence posts, or frozen lumps. When a beater hits an obstruction at 600 RPM, the kinetic energy must go somewhere. We integrate an Embrayage à roue libre (Free Wheel) and a Étrier à boulon de cisaillement on the input shaft. The shear bolt acts as a fuse, snapping instantly to disconnect power, while the free wheel allows the heavy beaters to spin down gradually, preventing back-drive damage to the tractor PTO.
3. Corrosion-Proof Sealing
Ammonia is a seal killer. It hardens standard NBR rubber, causing it to crack and leak. EVER-POWER utilizes premium FKM (Viton) Seals as standard on all manure spreader gearboxes. Furthermore, we install a steel “Slinger Shield” on the output shaft. This physical barrier rotates with the shaft, throwing wet manure away from the seal face by centrifugal force.
4. Thermal Capacity
Spreading 15 tons of manure takes time and power. The gearbox runs hot. Our housings feature extended cooling fins and a larger oil sump capacity (up to 5.5 Liters) compared to competitors. This increased thermal mass keeps the oil temperature stable, preventing viscosity breakdown during long shifts in the Brazilian summer heat.
Technical Specifications: AD-Series (Apron/Floor Chain Drive)
| Paramètre | Spécification | Paramètre | Spécification |
|---|---|---|---|
| Type de lecteur | Worm Gear / Planetary | Taux de réduction | 25:1 to 50:1 (High Torque) |
| Source d'entrée | Hydraulic Motor (SAE A/B) | Régime moteur d'entrée | 300 – 600 RPM |
| Couple de sortie | Max 12,000 Nm | Vitesse de sortie | 5 – 20 RPM (Variable) |
| Logement | Cast Iron / Steel Fabricated | Arbre de sortie | Hollow 50mm / 60mm |
| Worm Wheel | Bronze CuSn12 (Centrifugal) | Worm Shaft | Hardened Steel 20Cr |
| Roulements | Oversized Tapered Roller | Lubrification | Huile PAG synthétique (polyglycol) |
| Capacité de charge | Moves 20 Ton Payload | Montage | Bras de torsion monté sur arbre |
| Scellage | Double Lip FKM | Autobloquant | Yes (Prevents rollback) |
System Comparison: Hydraulic vs. Mechanical Apron Drive
| Fonctionnalité | Hydraulic Apron Drive (AD Series) | Mechanical Ratchet Drive |
|---|---|---|
| Régulateur de vitesse | Infinite Variable (Cab Control) | Fixed / Stepped Steps |
| Load Start | Smooth (High Torque) | Jerky (Shock Loads) |
| Inverse | Déblocage instantané | Impossible / Difficult |
| Entretien | Low (Sealed Gearbox) | Haut (Chaînes, Cliquets, Ressorts) |
| Précision | High (GPS Compatible) | Faible |
*Analysis based on variable rate application efficiency in Mato Grosso feedlots.
Application localisée : Agro-industrie brésilienne
Feedlots (Goiás)
Large feedlots generate tons of heavy, wet cattle manure daily. The machines run continuously. Our Planetary Apron Drives offer the extreme torque (12,000 Nm) needed to push 20-ton loads of wet slurry without stalling, replacing older worm gear units that overheated.
Litière de volaille (Santa Catarina)
Poultry litter is lighter but drier and more corrosive. Precision spreading is key to avoid nitrogen burn. Our RT-Series Beater Boxes run at higher speeds (1000 input / 800 output) to finely shred the litter, providing a wide, uniform spread pattern ideal for top-dressing pastures.
📒 Field Engineer’s Log: The “Frozen” Floor
“August 2025, Ponta Grossa, PR. A customer called saying his apron chain snapped. It was a cold morning (2°C). He had left a full load of wet manure in the spreader overnight.”
“The manure had frozen solid to the steel floor. When he engaged the hydraulic apron drive, the AD-50 Gearbox produced so much torque that it snapped the 16mm floor chains instantly. The gearbox itself was undamaged.
Solution: We advised the customer to install a Hydraulic Relief Valve set to the chain’s breaking limit (load sensing). This acts as a safety fuse. We also recommended our ‘High-Torque’ chain kit. The gearbox proved it was stronger than the rest of the machine.”
Foire aux questions (OEM/B2B)
1. Can I convert a mechanical apron drive to hydraulic?
Yes. We supply a complete “Apron Conversion Kit” which includes the AD-Series Gearbox (hollow shaft), torque arm, and a compatible Danfoss/Eaton hydraulic motor. You simply remove the old ratchet mechanism and slide our gearbox onto the drive shaft.
2. What is the difference between Worm and Planetary apron drives?
Worm drives (AD-W series) are self-locking (safety) and cheaper but less efficient (get hot). Planetary drives (AD-P series) are extremely efficient and powerful but more expensive and require a separate brake valve to prevent rollback. We offer both.
3. Do you sell the PTO shafts with shear bolts?
Yes, for the Beater Gearbox, we highly recommend our Shear Bolt PTO Shaft ou un Cam Clutch Shaft. This protects the gearbox gears from shock loads if a stone jams the beaters.
4. How often should I change the gearbox oil?
For the Beater Box (RT-Series), change oil every season or 500 hours. For the Apron Drive (Worm), if using synthetic PAG oil, it is often “Sealed for Life,” but checking levels annually is recommended.
Complétez votre système d'épandage
Marine Grade Floor Chains
High-tensile, corrosion-resistant chains for long life in acidic manure.
Cam-Clutch PTOs
Automatic reset clutches. The best protection for beater gearboxes.
Moteurs hydrauliques
High-torque orbital motors (Danfoss style) for apron drive gearboxes.
Built for the Toughest Job on the Farm
Don’t let a broken gearbox stop your waste management. Upgrade to EVER-POWER.
© 2026 EVER-POWER Transmission. Tous droits réservés.
Major Markets: Brazil, USA, France, New Zealand, Russia.
