The Backbone of 90-Degree Power Transmission
In the vast agricultural expanse of Brazil, from the soy fields of Mato Grosso to the sugar cane plantations of São Paulo, the redirection of mechanical power is a fundamental necessity. The Agricultural Bevel Gearbox (Caixa de Transmissão Angular) is the industry standard for transmitting torque from the tractor’s Power Take-Off (PTO) shaft to an implement operating at a 90-degree angle. Whether driving the blades of a Rotary Cutter (Roçadeira), the discs of a Fertilizer Spreader (Adubadeira), or the screw of a Grain Auger (Rosca Transportadora), these gearboxes are the silent workhorses of the farm.
The engineering challenge lies in efficiency and durability. A Bevel Gearbox must handle high input speeds (typically 540 or 1000 RPM) and transmit them with minimal thermal loss while withstanding significant axial and radial loads. The internal geometry, specifically the choice between Straight Bevel Gears I Przekładnie stożkowe spiralne, dictates the gearbox’s noise level, torque capacity, and lifespan.
EVER-POWER's AB-Series (Agricultural Bevel) offers a comprehensive range of right-angle drives. From compact 15 HP aluminum units for fertilizer spreaders to massive 150 HP cast iron behemoths for heavy-duty rotary slashers, our gearboxes are engineered with forged gears, premium tapered roller bearings, and dual-lip seals designed to keep Brazilian red dust out and lubrication in.
Technical Specifications: AB-Series (Right Angle Drive)
| Parametr | Specyfikacja | Parametr | Specyfikacja |
|---|---|---|---|
| Input Power Range | 15 HP – 160 HP (11-120 kW) | Ratios | 1:1 / 1:1.47 / 1:1.92 / 1:2.8 |
| Prędkość wejściowa | 540 / 1000 obr./min | Konfiguracja | L-Box (2-Way) / T-Box (3-Way) |
| Materiał obudowy | Ductile Iron QT450 / Aluminum | Maksymalny moment obrotowy | Up to 2,500 Nm |
| Wał wejściowy | 1-3/8″ Z6 Spline / Round Keyed | Wał wyjściowy | 1-1/2″ Round / Tapered / Spline |
| Typ przekładni | Spiral Bevel / Straight Bevel | Materiał przekładni | 20CrMnTiH (Carburized 58-62 HRC) |
| Typ łożyska | Wałek stożkowy (Timken/SKF) | Smarowanie | Oil Bath (SAE 90 / 85W-140) |
| System uszczelniający | Dual Lip NBR / FKM | Reakcja | Standard (< 0.2mm) / Low |
| Pojemność oleju | 0.5 L – 4.5 L | Temperatura pracy | -20°C to +100°C |
| Wzór montażowy | 4-Bolt Base / Flange | Ocena termiczna | Continuous S1 |
| Waga (sucha) | 5 kg – 85 kg | Odpowietrznik | Spring Loaded / Filtered |
| Farba | Epoxy Blue / Black / Red | Gwarancja | 18 miesięcy |
| Aplikacja | Rotary Cutter / Spreader / Auger | Współczynnik usług | 1.5 (Ag Heavy Duty) |
Engineering the 90-Degree Turn
1. Spiral vs. Straight Bevel Gears
The heart of the gearbox is the gear set. Straight Bevel Gears are simpler and cost-effective, ideal for low-speed applications like augers or manual post-hole diggers. However, they are noisy at high speeds. Przekładnie stożkowe spiralne (Gleason cut) have curved teeth that engage gradually. This results in 30% higher torque capacity, significantly quieter operation, and smoother power transmission, making them essential for high-speed (540/1000 RPM) rotary cutters and mowers.
2. The T-Box vs. L-Box Configuration
Configuration defines the power path. An L-Box has one input and one output shaft at 90 degrees, typical for rotary cutters or slashers. A T-Box has one input and two outputs (inline or opposed). T-Boxes are crucial for multi-spindle cutters (bat wings) or twin-disc fertilizer spreaders, where a single PTO input must drive two synchronized mechanisms simultaneously.
3. Bearing Preload & Shim Adjustment
The longevity of a bevel gearbox depends on proper gear meshing (backlash and contact pattern). This is controlled by the bearing preload. EVER-POWER assembles gearboxes using precise Shim Packs behind the bearing races. This ensures that under load and thermal expansion, the gear teeth maintain optimal contact patches, preventing edge-loading and premature tooth fracture.
4. Breather & Thermal Expansion
As the gearbox runs, the oil heats up and air expands. Without a vent, internal pressure would blow out the seals. We utilize a Spring-Loaded Breather Plug. It keeps dust and moisture out but opens at a specific psi to relieve internal pressure. This is critical in the dusty Brazilian Cerrado, where an open vent would suck in abrasive grit during cooling cycles.
Comparative Analysis: Bevel Gearbox vs. Worm Gearbox
| Funkcja | Bevel Gearbox (AB Series) | Przekładnia ślimakowa |
|---|---|---|
| Efektywność | Wysoki (95-98%) | Low (60-80%) |
| Prędkość wejściowa | High (540/1000 RPM) | Low to Medium |
| Jazda tyłem | Reversible (Freewheeling) | Self-Locking (Often) |
| Heat Generation | Niski | High (Friction) |
| Aplikacja | Rotary Cutters, Spreaders | Winches, Elevators |
*Efficiency data based on 1:1 ratio performance tests.
Zlokalizowane zastosowanie: Brazylijski biznes rolny
Rotary Cutters (Roçadeiras)
The “Roçadeira” is essential for pasture maintenance and clearing crop residue. In Brazil, these machines encounter tough conditions like ant hills (cupinzeiros) and woody brush. Our AB-Series gearboxes for cutters (40HP to 150HP) feature reinforced output shafts (up to 2 inches) and oversized bearings to survive the high shock loads of blade impact.
Fertilizer Spreaders (Adubadeiras)
For twin-disc spreaders common in soy farming, synchronization is key. We supply T-Box Gearboxes with Aluminum Housings. The aluminum resists corrosion from NPK fertilizers better than cast iron (which rusts) and reduces the weight on the spreader frame. Stainless steel shafts are an available option for extreme corrosion resistance.
📒 Field Engineer’s Log: The “Howling” Gearbox
“November 2025, Ribeirão Preto, SP. A sugar cane farmer complained about a screaming noise from his new post-hole digger gearbox. It was running hot, over 95°C.”
“We inspected the unit. The backlash was set too tight from the factory (not an EVER-POWER unit), leaving no room for oil film between the teeth. The gears were grinding metal-on-metal.
Rozwiązanie: Zastąpiliśmy go naszym AB-75 Heavy Duty gearbox. Before installation, we verified the backlash was set to 0.15mm and filled it with SAE 85W-140 gear oil. The thicker oil provided a better cushion for the low-speed, high-torque digging operation. The unit ran cool and quiet for the rest of the season.”
Często zadawane pytania (OEM/B2B)
1. Can I use a 540 RPM gearbox at 1000 RPM?
No. Gearboxes are rated for specific input speeds. Running a 540 RPM box at 1000 RPM will overheat the oil and may cause bearing failure due to excessive centrifugal force and friction. Always match the gearbox rating to your tractor PTO speed.
2. What is the difference between “Speed Increaser” and “Reducer”?
A Reduktor prędkości (e.g., 1.5:1) slows down the output (common for rotary cutters to increase torque). A Zwiększacz prędkości (e.g., 1:1.92) speeds up the output (common for fertilizer spreaders or sprayers to spin discs/fans faster). Bevel boxes can often be used both ways, but check thermal ratings first.
3. Do you supply the PTO shafts as well?
Yes, we offer complete drivetrain packages including the Cardan Shaft (PTO Shaft) with safety clutches (Shear Bolt or Slip Clutch) matched to the gearbox input shaft (usually 1-3/8″ Z6).
4. Are these gearboxes filled with oil?
For shipping safety, most gearboxes are shipped dry. You must fill them with the specified gear oil (usually SAE 90) to the level plug before operation. Running dry will void the warranty instantly.
Complete Your Drivetrain System
Wały napędowe WOM
Heavy-duty cardan shafts with shear bolt and slip clutch protection.
Post Hole Digger Boxes
Specialized bevel gearboxes with reinforced output shafts for augers.
Blade Hubs & Pans
Stump jumper pans and blade carriers matched to our gearboxes.
Drive Your Farm Forward
From cutting to spreading, trust EVER-POWER Bevel Gearboxes for reliability in the field.
© 2026 EVER-POWER Transmission. Wszelkie prawa zastrzeżone.
Major Markets: Brazil, USA, Argentina, Australia, Europe.
